Plan the complete path from loose closures and filled containers to an inspected package. Automatic capping selection starts with the closure action: pressing a snap lid, tightening a thread, or applying the tooling required by an aluminum closure.
Send Deepack your container and cap samples, required output and line layout. Review feeding, container spacing, capping and downstream transfer together, including how operators replenish caps and restart after an interruption.
The five configurations below follow the reference automatic category. Final Deepack equipment, model identity and performance require project confirmation.
Discuss Your Automatic Capping ProjectApproved product media pending
For projects using a press-on safety closure, begin with the complete container and lid set. Review lid orientation, pressing access and the force needed to seat the cap. The product name alone does not establish child-resistant package certification.
LPE-CRL001. Reference-company identifier; confirmed Deepack specifications are pending.
Approved product media pending
Review conveyor transfer and cap pickup for a dust-cover application. Agree how lid seating will be inspected and where containers enter and leave the station. This is a separate reference product from the linear fully automatic dustproof model.
LPE-DPC60. Reference-company identifier; confirmed Deepack specifications are pending.
Approved product media pending
Bring the glass neck finish and aluminum closure drawings to the configuration review. Establish the required tooling action and bottle support, then test the closure after application. Include transfers into and out of the rotary station.
LPE-RVS040. Reference-company identifier; confirmed Deepack specifications are pending.
Approved product media pending
For threaded closures, review the cap contact surface and how the container is restrained during tightening. Record settings for each package format and agree checks for cap alignment, removal torque and tamper-band condition.
LPE-SCM008. Reference-company identifier; confirmed Deepack specifications are pending.
Approved product media pending
For a glass jar project requiring vacuum, describe the filled product, temperature and headspace. Define when package vacuum will be measured, alongside the closure inspection. Confirm the equipment identity before agreeing a specification.
LPE-RSC040 on this category; LPE-RVS040 appears elsewhere in the screw category. Reference-company identifier; confirmed Deepack specifications are pending.
Include closure and neck drawings, filled container weight, target output, electrical supply and conveyor layout. Tell us how you intend to inspect the finished package.