Bottle and cap dimensions
Provide bottle height, body diameter, filled weight, neck finish and cap drawings for each format. Check the proposed guides and closure contact parts against actual samples.
High Speed 8 Heads Spin Capping Machine
Eight Head Spin Capping for Bottle Lines
Product media awaiting approval
This reference configuration combines eight capping heads with adjustable bottle and lid settings. Automatic lifting is described for switching between bottle types, while cap tightness can be adjusted for the closure.
Review your bottle diameter, height and cap geometry together. The source output varies with bottle size, so establish the required accepted output using representative filled containers and closures.
Discuss Your Eight Head Capping ProjectDownload reference notes (TXT)
Reference notes are not an official specification PDF.
Eight Head Spin Capping Reference Data
Levapack reference data only. These are not confirmed Deepack specifications or guaranteed production results.
| Item | Reference value |
|---|---|
| Reference model | LPE-CSM08 |
| Capping heads | 8 |
| Reference output | 3600–6000 bottles/hour, depending on bottle size |
| Bottle height | 80–280 mm |
| Lid diameter | 15–150 mm |
| Bottle diameter | 30–210 mm |
| Adjustment | Adjustable cap tightness and automatic lifting |
| Reference construction | Stainless steel, anti-oxidation aluminum and a wear-resistant silicone cover wheel |
Read the source scope
The source describes stainless steel and anti-oxidation aluminum construction, a silicone cover wheel, adjustable cap tightness and automatic lifting. It supplies no stainless steel grade, numeric torque range, torque accuracy, electrical load or machine footprint.
The source download points to a DOCX file. The TXT here summarizes reference information and is not a verified Deepack specification.
Plan an Eight Head Capping Trial
Output and line balance
State the required accepted bottles per hour and upstream delivery pattern. Measure output with your bottle size and inspection criteria, including starts, stops and rejected closures.
Lift and tightness settings
Review height adjustment and changeover access. Agree cap tightness and an inspection method using your closure; request the confirmed settings and trial results.
Return to the Capping Range
This configuration is listed in the Screw Capping Machines panel of the main capping range.
Request an Eight Head Capping Review
Share bottle and cap drawings, format changes, required output and line layout. Request a confirmed equipment specification and sample trial plan.