Support the Can Body
Provide the filled weight, base geometry and can drawing. Review the support and chuck contact before agreeing the tooling.
Semi Auto Can Seamer
Single-Head Seaming with Operator Handling
Explore an ordinary semi-automatic can seamer for a workstation where operator handling must be planned alongside the seaming cycle. Start with a matched can and end, the product inside and the intended output.
The reviewed model is described with a stationary can body during seaming. Confirm how the offered machine supports the package and how an operator loads, starts and unloads it.
Discuss Your Can Seaming ProjectDownload reference notes (TXT)
This reference TXT is not a formal specification PDF.
Reference Specifications
Levapack reference description only. These model and material statements are not confirmed specifications of a Deepack offer.
| Item | Reference description |
|---|---|
| Reference model | LPE-SLV20 |
| Seaming arrangement — source description | Semi-automatic, single head |
| Can motion — source description | Can body remains stationary during seaming |
| Machine material — source description | 304 stainless steel; component scope requires confirmation |
| Seaming roller material — source description | Cr12 steel |
| Output, size range and utilities | Not specified in the reviewed description; confirm for your can and end |
| Offered Deepack configuration | Model, tooling, materials and operating sequence require confirmation |
Read the source and confirmation limits
The source positions its stationary-can arrangement for liquids and products vulnerable to spilling or damage. Actual suitability requires a trial with your filled can. Material names alone do not establish corrosion resistance, food-contact compliance or seam quality.
Review the Filled Can at the Seaming Station
Control Product Movement
Use the intended fill level in trials. Observe handling, spillage and product damage through the complete loading and unloading cycle.
Confirm the End Fit
Supply matching ends and the seam specification. Verify the proposed roller profiles and chuck against each package format.
Define the Workstation Configuration
Operator actions and controls
Ask for a demonstration of can placement, end placement, cycle initiation and finished-can removal. Confirm guards, interlocks and safe recovery with the offered machine manual.
Tooling and format changes
List each can diameter, height and end profile. Identify change parts and adjustments, then demonstrate the changeover with matching samples.
Cleaning, materials and utilities
Request component-level material records, cleaning instructions and the electrical and other utility requirements. Confirm the included equipment and service access before approving the workstation layout.
Choose the Required Seaming and Handling Arrangement
Ordinary Semi-Automatic Seaming
This page covers the LPE-SLV20 reference. Review package support, operator handling and seam inspection. No vacuum or nitrogen function is established by the reviewed description.
Semi-Automatic Vacuum and Nitrogen
Vacuum and gas handling need a separate configuration review and acceptance method.
Fully Automatic Round Can Seaming
Review can infeed, end handling and discharge as well as output. Automatic-model specifications do not transfer to this semi-automatic reference.
Plan a Trial with Your Can and End
- Confirm the can and end drawings and the proposed tooling list.
- Run the intended filled package through all operator steps.
- Inspect the finished seam against the agreed can and end specification.
- Record actual output, handling interruptions, spills or package damage.
- Repeat with each planned format and document the required adjustments.
Agree sampling, inspection tools and acceptance criteria with the supplier. A closed can alone does not prove shelf life or package compliance.
Prepare Your Seamer Enquiry
- Can and end drawings with matching empty samples
- Product characteristics, fill quantity and filled-can weight
- Target output, operator arrangement and available workspace
- Planned formats and changeover frequency
- Available utilities and requested material documentation
- Seam inspection specification and sample-trial requirements
Semi-Automatic Can Seamer FAQs
Does the can rotate during seaming?
The reference describes a stationary can body during seaming. Confirm the actual motion and support arrangement on the offered machine.
Does this model include vacuum or nitrogen flushing?
The reviewed description does not establish those functions. Use the separate vacuum and nitrogen model detail to discuss that requirement.
Is every operator step automatic?
No complete operating sequence is established here. Confirm loading, end placement, cycle initiation and unloading individually.
Will it handle my liquid or fragile product?
Trial your intended filled can and end. Observe product movement and package damage as well as the finished seam; a reference application is not a compatibility guarantee.
Are the materials and production speed confirmed for Deepack?
No. Material statements identify the reference description, and no output figure is supplied here. Confirm the offered specification and measured trial output.
Will submitting this form send an enquiry?
Use the Send Your Enquiry button and wait for the on-page delivery confirmation. If delivery fails, use the contact details on the site and try again.
Return to the Equipment Categories
Discuss Your Semi-Automatic Can Seamer
Tell us about your can, end, filled product and operator handling requirements.