Compact, manual-assisted path
The DP-FK-170A page shows one equipment starting point. Confirm its mold, film path, electrical configuration and observed output against your own samples.
Review DP-FK-170A →Tray Sealing Machines
Start with the Tray, Film and Product
Match the sealing machine to the complete pack: tray rim, sealing film, food product and operator workflow. Start with a tray sample or drawing so the mold and sealing arrangement can be reviewed together.
For compact production, explore the existing DP-FK-170A detail page. For a larger production requirement, share the output and loading arrangement before selecting a configuration.
Discuss Your Tray PackagingMatch the tray, film and operator flow
A product title alone cannot establish which trays or films a machine will run. Use the actual tray and lidding film to review the mold, the sealing surface and how a filled pack moves through the workstation.
Production step-up
Describe your loading, sealing, removal and format-change needs before selecting another Dingfei configuration. The model and supply scope require a specific proposal.
Map the production workflow →Sample acceptance
Bring representative filled trays and the intended film. Agree how seal continuity, appearance, opening behaviour and actual cycle output will be checked.
Plan the trial →Explore Deepack Tray Equipment
DP-FK-170A Tray Sealer
Compact, manual-assisted tray sealing with a matched mold and roll-film workflow. Review the existing equipment page and workshop material.
DP-FK-180 / 190 and DP-FK-580A are configuration paths mentioned on the existing product page. Their dedicated detail pages and final configurations are not available here. Discuss the required process with Deepack before choosing a model.
Review the Complete Tray Pack
Tray geometry and mold
Send the tray drawing, overall dimensions, depth, rim profile and a physical sample. Include every tray format and explain the intended changeover frequency.
Sealing film and finished pack
Provide the film specification, roll dimensions and any printed-film registration requirement. Agree the intended opening behavior and package checks using the actual tray and film.
Food, filling and operator flow
Describe the product, portion, filling temperature and possible liquid or food on the rim. Review loading, sealing and removal with representative filled trays.
Plan the Sealing Workflow
- Supply representative trays, film and filled samples.
- Confirm the mold, film-loading method and sealing arrangement.
- Review operator access, pack removal and format changes.
- Run agreed samples and record settings, seal inspection and actual output.
- Confirm the offered equipment, accessories and utilities in the quotation.
Heating settings, production rate, voltage, power and maximum tray dimensions require confirmation for the offered machine. No numerical performance is established by this category page.
Define the Supply Scope
Discuss machine, mold, film rolls and trays as a matched package. Confirm whether an air compressor or other auxiliary equipment is required and included for the proposed configuration.
If your project requires vacuum or gas flushing, state that requirement explicitly. The presence of a tray-sealing model name does not establish MAP capability, gas composition, residual oxygen or shelf-life performance.
Review Your ConfigurationTray Sealing FAQs
Which product detail can I open now?
The DP-FK-170A detail page is available. Other model names identify configuration discussions, not completed product pages.
Will one mold fit every tray?
Provide each tray drawing and sample so mold fit and change parts can be confirmed. Similar external dimensions do not establish compatibility.
Can you confirm output or electrical requirements here?
Output, voltage, power and tray dimensions require confirmation against the proposed model, package and destination.
Does this category confirm MAP or shelf life?
No. Vacuum or gas-flushing requirements need a specific equipment proposal and a documented product and packaging trial.
What should I send for a tray review?
Send tray and film specifications, food and fill details, target output, available space, utilities and changeover requirements.
Does the enquiry form send a message?
Yes. Submit the enquiry form and wait for the on-page delivery confirmation. If delivery fails, use the contact details on the site and try again.
Return to Deepack Equipment
Discuss Your Tray and Sealing Film
Share tray dimensions, rim and material, film specification, food product, target output and destination utilities.